{"product_id":"jet-flo-73113-cartridge-filter-70-gpm-for-swimming-pools","title":"Jet-Flo 73113 Cartridge Filter, 70 gpm, for Swimming Pools","description":"\u003cp\u003e- Jet-Flo 73113 cartridge filter is a replacement filter with 70 gallons per minute.\u003cbr\u003e- It provides a high degree of water clarity by filtering out dirt and debris from pools and bodies of water.\u003cbr\u003e- It is made with tough and long-lasting thermoplastic materials.\u003cbr\u003e- The top cover is built with a pressure gauge and release valve.\u003c\/p\u003e\n\u003cp\u003e- Specifications:\u003cbr\u003e  - Effective filtration area: 70ft\u003cbr\u003e  - Design-flow rate: 70 gpm\u003cbr\u003e  - Maximum working pressure: 50 PSI (3.5 BAR)\u003c\/p\u003e\n\u003cp\u003e- Clean \/ Replace Cartridge:\u003cbr\u003e  - Turn off the pump.\u003cbr\u003e  - If the filter is located below water level, the valves (or block off suction and discharge lines) should be closed to prevent backflow of water from the pool.\u003cbr\u003e  - Unscrew and remove drain plug to allow water drain from the filter then close drain plug afterwards.\u003cbr\u003e  - Unscrew and remove the locking knob which is in a counterclockwise direction.\u003cbr\u003e  - Carefully remove top cover to have access to filter cartridge.\u003cbr\u003e  - Either pull out the cartridge and clean it or replace it with a clean, spare cartridge.\u003c\/p\u003e\n\u003cp\u003e- Reinstalling Cartridge Element:\u003cbr\u003e  - Take away any collected debris from the bottom of the filter body.\u003cbr\u003e  - Carefully replace the cartridge element over the tie rod and into the filter body.\u003cbr\u003e  - Ensure that the cartridge sits properly on the collector hub in the bottom of the filter body.\u003cbr\u003e  - Hand tight the locking knob in counterclockwise direction.\u003cbr\u003e  - Start the filter.\u003c\/p\u003e\n\u003cp\u003e- Cleaning Cartridge:\u003cbr\u003e  - To remove fine particles, wash it first with a garden hose then dry it before carefully brushing the pleated surface areas since it is easier to clean when dry.\u003cbr\u003e  - Removing algae, suntan oil and body oils can form a coating on the cartridge pleats so the cartridge needs to be soaked first in a solution of filter element cleaner for an hour before reinstalling the filter.\u003cbr\u003e  - The cartridge can look brand new by soaking it in 20% muriatic acid that is added to water in 1 to 1 ratio.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Watershop.ph","offers":[{"title":"Default Title","offer_id":51186647630112,"sku":"7420","price":11900.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/1752\/9632\/files\/Screenshot2026-02-03153426.png?v=1770104078","url":"https:\/\/www.watershop.ph\/products\/jet-flo-73113-cartridge-filter-70-gpm-for-swimming-pools","provider":"Watershop.ph","version":"1.0","type":"link"}